Fertilizer | Definition, Types, Plant Nutrients, Application, & ...

30 Sep.,2024

 

Fertilizer | Definition, Types, Plant Nutrients, Application, & ...

fertilizer

A tractor spreading synthetic fertilizer.

If you are looking for more details, kindly visit Sanyuanjiuqi.

fertilizer

agriculture

fertilizer, natural or artificial substance containing the chemical elements that improve growth and productiveness of plants. Fertilizers enhance the natural fertility of the soil or replace chemical elements taken from the soil by previous crops.

Soil fertility is the quality of a soil that enables it to provide compounds in adequate amounts and proper balance to promote growth of plants when other factors (such as light, moisture, temperature, and soil structure) are favourable. Where fertility of the soil is not good, natural or manufactured materials may be added to supply the needed plant nutrients. These are called fertilizers, although the term is generally applied to largely inorganic materials other than lime or gypsum.

Determining nutrient needs

Determination of a crop&#;s nutrient needs is an essential aspect of fertilizer technology. The appearance of a growing crop may indicate a need for fertilizer, though in some plants the need for more or different nutrients may not be easily observable. If such a problem exists, its nature must be diagnosed, the degree of deficiency must be determined, and the amount and kind of fertilizer needed for a given yield must be found. There is no substitute for detailed examination of plants and soil conditions in the field, followed by simple fertilizer tests, quick tests of plant tissues, and analysis of soils and plants.

chlorosis

A young corn plant with chlorosis (left) contrasted with a healthy young corn plant (right).

Sometimes plants show symptoms of poor nutrition. Chlorosis (general yellow or pale green colour), for example, indicates lack of sulfur and nitrogen. Iron deficiency produces white or pale yellow tissue. Symptoms can be misinterpreted, however. Plant disease can produce appearances resembling mineral deficiency, as can various organisms. Drought or improper cultivation or fertilizer application each may create deficiency symptoms.

Are you a student?

Get a special academic rate on Britannica Premium.

Subscribe

After field diagnosis, the conclusions may be confirmed by experiments in a greenhouse or by making strip tests in the field. In strip tests, the fertilizer elements suspected of being deficient are added, singly or in combination, and the resulting plant growth observed. Next it is necessary to determine the extent of the deficiency.

An experiment in the field can be conducted by adding nutrients to the crop at various rates. The resulting response of yield in relation to amounts of nutrients supplied will indicate the supplying power of the unfertilized soil in terms of bushels or tons of produce. If the increase in yield is large, this practice will show that the soil has too little of a given nutrient. Such field experiments may not be practical, because they can cost too much in time and money. Soil-testing laboratories are available in most areas; they conduct chemical soil tests to estimate the availability of nutrients. Commercial soil-testing kits give results that may be very inaccurate, depending on techniques and interpretation. Actually, the most accurate system consists of laboratory analysis of the nutrient content of plant parts, such as the leaf. The results, when correlated with yield response to fertilizer application in field experiments, can give the best estimate of deficiency. Further development of remote sensing techniques, such as infrared photography, are under study and may ultimately become the most valuable technique for such estimates.

The economics of fertilizers

The practical goal is to determine how much nutrient material to add. Since the farmer wants to know how much profit to expect when buying fertilizer, the tests are interpreted as an estimation of increased crop production that will result from nutrient additions. The cost of nutrients must be balanced against the value of the crop or even against alternative procedures, such as investing the money in something else with a greater potential return. The law of diminishing returns is well exemplified in fertilizer technology. Past a certain point, equal inputs of chemicals produce less and less yield increase. The goal of the farmer is to use fertilizer in such a way that the most profitable application rate is employed. Ideal fertilizer application also minimizes excess and ill-timed application, which is not only wasteful for the farmer but also harmful to nearby waterways. Unfortunately, water pollution from fertilizer runoff, which has a sphere of impact that extends far beyond the farmer and the fields, is a negative externality that is not accounted for in the costs and prices of the unregulated market.

Fertilizers can aid in making profitable changes in farming. Operators can reduce costs per unit of production and increase the margin of return over total cost by increasing rates of application of fertilizer on principal cash and feed crops. They are then in a position to invest in soil conservation and other improvements that are needed when shifting acreage from surplus crops to other uses.

Synthetic fertilizers

Modern chemical fertilizers include one or more of the three elements that are most important in plant nutrition: nitrogen, phosphorus, and potassium. Of secondary importance are the elements sulfur, magnesium, and calcium.

ammonium nitrate

Structure of the chemical compound ammonium nitrate, from which fertilizer is produced.

Most nitrogen fertilizers are obtained from synthetic ammonia; this chemical compound (NH3) is used either as a gas or in a water solution, or it is converted into salts such as ammonium sulfate, ammonium nitrate, and ammonium phosphate, but packinghouse wastes, treated garbage, sewage, and manure are also common sources of it. Because its nitrogen content is high and is readily converted to ammonia in the soil, urea is one of the most concentrated nitrogenous fertilizers. An inexpensive compound, it is incorporated in mixed fertilizers as well as being applied alone to the soil or sprayed on foliage. With formaldehyde it gives methylene-urea fertilizers, which release nitrogen slowly, continuously, and uniformly, a full year&#;s supply being applied at one time.

Phosphorus fertilizers include calcium phosphate derived from phosphate rock or bones. The more soluble superphosphate and triple superphosphate preparations are obtained by the treatment of calcium phosphate with sulfuric and phosphoric acid, respectively. Potassium fertilizers, namely potassium chloride and potassium sulfate, are mined from potash deposits. Of commercially produced potassium compounds, almost 95 percent of them are used in agriculture as fertilizer.

Mixed fertilizers contain more than one of the three major nutrients&#;nitrogen, phosphorus, and potassium. Fertilizer grade is a conventional expression that indicates the percentage of plant nutrients in a fertilizer; thus, a 10&#;20&#;10 grade contains 10 percent nitrogen, 20 percent phosphoric oxide, and 10 percent potash. Mixed fertilizers can be formulated in hundreds of ways.

Organic fertilizers and practices

The use of manure and compost as fertilizers is probably almost as old as agriculture. Many traditional farming systems still rely on these sustainable fertilizers, and their use is vital to the productivity of certified organic farms, in which synthetic fertilizers are not permitted.

Farm manure

manure

Manure, a mixture of animal excrement and straw, piled in a field in France.

For more information, please visit other fertilizers.

Among sources of organic matter and plant nutrients, farm manure has been of major importance. Manure is understood to mean the refuse from stables and barnyards, including both excreta and straw or other bedding material. Large amounts of manure are produced by livestock; such manure has value in maintaining and improving soil because of the plant nutrients, humus, and organic substances contained in it.

Due to the potential for harbouring human pathogens, the USDA National Organic Standards mandate that raw manure must be applied no later than 90 or 120 days before harvest, depending on whether the harvested part of the crop is in contact with the ground. Composted manure that has been turned five times in 15 days and reached temperatures between 55 and 77.2 °C (131 and 171 °F) has no restrictions on application times. As manure must be managed carefully in order to derive the most benefit from it, some farmers may be unwilling to expend the necessary time and effort. Manure must be carefully stored to minimize loss of nutrients, particularly nitrogen. It must be applied to the right kind of crop at the proper time. Also, additional fertilizer may be needed, such as phosphoric oxide, in order to gain full value of the nitrogen and potash that are contained in manure.

Manure is fertilizer graded as approximately 0.5&#;0.25&#;0.5 (percentages of nitrogen, phosphoric oxide, and potash), with at least two-thirds of the nitrogen in slow-acting forms. Given that these nutrients are mostly in an unmineralized form that cannot be taken up by plants, soil microbes are needed to break down organic matter and transform nutrients into a bioavailable &#;mineralized&#; state. In comparison, synthetic fertilizers are already in mineralized form and can be taken up by plants directly. On properly tilled soils, the returns from synthetic fertilizer usually will be greater than from an equivalent amount of manure. However, manure provides many indirect benefits. It supplies humus, which improves the soil&#;s physical character by increasing its capacity to absorb and store water, by enhancement of aeration, and by favouring the activities of lower organisms. Manure incorporated into the topsoil will help prevent erosion from heavy rain and slow down evaporation of water from the surface. In effect, the value of manure as a mulching material may be greater than is its value as a source of essential plant nutrients.

Green manuring

nitrogen fixation

Close-up view of nitrogen nodules on fava bean (Vicia faba) roots. Fava beans and certain other crops are planted as green manures to add nitrogen back to the soil.

In reasonably humid areas the practice of green manuring can improve yield and soil qualities. A green manure crop is grown and plowed under for its beneficial effects, although during its growth it may be grazed. These green manure crops are usually annuals, either grasses or legumes, whose roots bear nodule bacteria capable of fixing atmospheric nitrogen. Among the advantages of green manure crops are the addition of nitrogen to the soil, an increase in general fertility, a reduction of erosion, an improvement of physical condition, and a reduction of nutrient loss from leaching. Disadvantages include the chance of not obtaining satisfactory growth; the possibility that the cost of growing the manure crop may exceed the cost of applying commercial nitrogen; possible increases in disease, insect pests, and nematodes (parasitic worms); and possible exhaustion of soil moisture by the crop.

Green manure crops are usually planted in the fall and turned under in the spring before the summer crop is sown. Their value as a source of nitrogen, particularly that of the legumes, is unquestioned for certain crops such as potatoes, cotton, and corn (maize); for other crops, such as peanuts (groundnuts; themselves legumes), the practice is questionable.

Compost

compost

Farmer managing a compost pile in France. Compost adds rich organic matter and beneficial microbes to the soil.

Compost is used in agriculture and gardening primarily as a soil amendment rather than as fertilizer, because it has a low content of plant nutrients. It may be incorporated into the soil or mulched on the surface. Heavy rates of application are common.

Compost is basically a mass of rotted organic matter made from waste plant residues. Addition of nitrogen during decomposition is usually advisable. The result is a crumbly material that when added to soil does not compete with the crop for nitrogen. When properly prepared, it is free of obnoxious odours. Composts commonly contain about 2 percent nitrogen, 0.5 to 1 percent phosphorus, and about 2 percent potassium. The nitrogen of compost becomes available slowly and never approaches that available from inorganic sources. This slow release of nitrogen reduces leaching and extends availability over the whole growing season. Composts are essentially fertilizers with low nutrient content, which explains why large amounts are applied. The maximum benefits of composts on soil structure (better aggregation, pore spacing, and water storage) and on crop yield usually occur after several years of use.

In practical farming, the use of composted plant residues must be compared with the use of fresh residues. More beneficial soil effects usually accrue with less labour by simply turning under fresh residues; also, since one-half the organic matter is lost in composting, fresh residues applied at the same rate will cover twice the area that composted residues would cover. In areas where commercial fertilizers are expensive, labour is cheap, and implements are simple, however, composting meets the need and is a logical practice.

Sewage sludge, the solid material remaining from the treatment of sewage, is not permitted in certified organic farming, though it is used in other, nonorganic settings. After suitable processing, it is sold as fertilizer and as a soil amendment for use on lawns, in parks, and on golf courses. Use of human biosolids in agriculture is controversial, as there are concerns that even treated sewage may harbour harmful bacteria, viruses, pharmaceutical residues, and heavy metals.

Liming

Liming to reduce soil acidity is practiced extensively in humid areas where rainfall leaches calcium and magnesium from the soil, thus creating an acid condition. Calcium and magnesium are major plant nutrients supplied by liming materials. Ground limestone is widely used for this purpose; its active agent, calcium carbonate, reacts with the soil to reduce its acidity. The calcium is then available for plant use. The typical limestones, especially dolomitic, contain magnesium carbonate as well, thus also supplying magnesium to the plant.

Marl and chalk are soft impure forms of limestone and are sometimes used as liming materials, as are oyster shells. Calcium sulfate (gypsum) and calcium chloride, however, are unsuitable for liming, for, although their calcium is readily soluble, they leave behind a residue that is harmful. Organic standards by the European Union and the U.S. Food and Drug Administration restrict certain liming agents; burnt lime and hydrated lime are not permitted for certified organic farms in the U.S., for example.

Lime is applied by mixing it uniformly with the surface layer of the soil. It may be applied at any time of the year on land plowed for spring crops or winter grain or on permanent pasture. After application, plowing, disking, or harrowing will mix it with the soil. Such tillage is usually necessary, because calcium migrates slowly downward in most soils. Lime is usually applied by trucks specially equipped and owned by custom operators.

Methods of application

Fertilizers may be added to soil in solid, liquid, or gaseous forms, the choice depending on many factors. Generally, the farmer tries to obtain satisfactory yield at minimum cost in money and labour.

Manure can be applied as a liquid or a solid. When accumulated as a liquid from livestock areas, it may be stored in tanks until needed and then pumped into a distributing machine or into a sprinkler irrigation system. The method reduces labour, but the noxious odours are objectionable. The solid-manure spreader, which can also be used for compost, conveys the material to the field, shreds it, and spreads it uniformly over the land. The process can be carried out during convenient times, including winter, but rarely when the crop is growing.

fertilizer

Farmers shoveling fertilizer.

Application of granulated or pelleted solid fertilizer has been aided by improved equipment design. Such devices, depending on design, can deposit fertilizer at the time of planting, side-dress a growing crop, or broadcast the material. Solid-fertilizer distributors have a wide hopper with holes in the bottom; distribution is effected by various means, such as rollers, agitators, or endless chains traversing the hopper bottom. Broadcast distributors have a tub-shaped hopper from which the material falls onto revolving disks that distribute it in a broad swath. Fertilizer attachments are available for most tractor-mounted planters and cultivators and for grain drills and some types of plows. They deposit fertilizer with the seed when planted, without damage to the seed, yet the nutrient is readily available during early growth. Placement of the fertilizer varies according to the types of crops; some crops require banding above the seed, while others are more successful when the fertilizer band is below the seed.

fertilizer application

Aerial view of a tractor towing a fertilizer applicator. The applicator is spraying liquid nitrogen fertilizer on a late spring cornfield.

The use of liquid and ammonia fertilizers is growing, particularly of anhydrous ammonia, which is handled as a liquid under pressure but changes to gas when released to atmospheric pressure. Anhydrous ammonia, however, is highly corrosive, inflammable, and rather dangerous if not handled properly; thus, application equipment is specialized. Typically, the applicator is a chisel-shaped blade with a pipe mounted on its rear side to conduct the ammonia 13 to 15 cm (5 to 6 inches) below the soil surface. Pipes are fed from a pressure tank mounted above. Mixed liquid fertilizers containing nitrogen, phosphorus, and potassium may be applied directly to the soil surface or as a foliar spray by field sprayers where close-growing crops are raised. Large areas can be covered rapidly by use of aircraft, which can distribute both liquid and dry fertilizer.

Contact us to discuss your requirements of npk 15-5-25+te. Our experienced sales team can help you identify the options that best suit your needs.