What are the Basic Knowledge of Plastic Mold Structure? Plastic mold structure refers to the composition and structure of the mold used to manufacture plastic products, mainly including 9 aspects such as mold base, mold cavity, mold core, gate system, cooling system, etc.

 

What are the Basic Knowledge of Plastic Mold Structure?

 

Plastic mold structure refers to the composition and structure of the mold used to manufacture plastic products, mainly including 9 aspects such as mold base, mold cavity, mold core, gate system, cooling system, etc.

 

 

 

 

The following is a detailed introduction to the basic knowledge of plastic mold structure:

 

(1) Mold base: The mold base is the main supporting part of the mold, usually made of steel plate or cast iron. It provides stability and rigidity to the mold to ensure that the mold will not deform or vibrate during use.

 

(2) Mold cavity: The mold cavity is the cavity part used to form the shape of the plastic product. Its shape and size are consistent with the final product. The mold cavity can be divided into an upper cavity and a lower cavity, and the product is formed by the cooperation of the upper and lower cavities.

 

(3) Mold core: The mold core is the part used to form the internal cavity of the plastic product. Its shape and size are consistent with the internal structure of the final product. The mold core is usually located inside the mold cavity, and the product is formed by the cooperation of the mold cavity and the mold core.

 

(4) Gate system: The gate system is the part used to inject molten plastic material. It includes the main gate, sub-gate and auxiliary gate. The main gate is the main channel for the molten plastic material to enter the mold, and the sub-gate and auxiliary gate are used to assist in filling the mold cavity and core.

 

(5) Cooling system: The cooling system is the part used to control the mold temperature. It includes cooling water channels and cooling nozzles. The cooling water channel absorbs the heat generated in the mold by circulating cooling water to keep the mold within the appropriate temperature range.

 

(6) Exhaust system: The exhaust system is the part used to remove the gas generated in the mold. During the injection molding process, the molten plastic will produce gas. If it is not removed in time, it will cause bubbles or defects in the product. The exhaust system achieves gas removal by setting exhaust grooves, exhaust holes, etc.

 

(7) Positioning system: The positioning system is the part used to ensure the accurate positioning of the mold cavity and core. It includes positioning pins, positioning sleeves and positioning plates. The positioning system enables the mold cavity and core to maintain the correct position when closed to ensure the consistency of product size and shape.

 

(8) Injection system: The injection system is the part used to inject molten plastic material into the mold. It includes the ejection cylinder, the ejection nozzle and the ejection mechanism. The ejection system pushes the molten plastic material into the mold cavity and core by controlling the pressure and speed of the ejection cylinder.

 

(9) Demolding system: The demolding system is the part used to remove the molded product from the mold. It includes the ejector rod, the ejector plate and the ejector mechanism. The demolding system ejects the molded product from the mold cavity through the action of the ejector rod for the next step of processing and packaging.

 

In summary, the basic knowledge of plastic mold structure includes mold base, mold cavity, mold core, gate system, cooling system, exhaust system, positioning system, injection system and demolding system. These components cooperate with each other to complete the molding process of plastic products. Understanding and mastering these basic knowledge is essential for designing and manufacturing high-quality plastic molds.